The IoC Testing Framework

The IoC Testing Framework is written using our existing jqUnit wrapper for jQuery's QUnit as a base. The IoC Testing Framework is both written using Fluid's IoC system, as well as being designed to test components which are themselves written using IoC. This framework aims to extend our power to write tests in various directions at the same time. As well as creating an idiomatic way of writing integration tests addressed at realistic-sized chunks of applications, expressed as IoC component trees, the IoC testing framework also considerably eases the task of testing complex event sequences - that is, sequences of application state that are derived from an alternating conversation between user interaction and application response.

When to use the IoC Testing Framework

Note: The IoC Testing framework is primarily for integration testing requiring asynchrony, e.g. on the client, testing that involves user interaction via the DOM, or AJAX requests; or alternatively on the server, involving asynchronous I/O such as HTTP requests.

If your tests don't involve a number of back-to-back asynchronous interactions, it is better to express them as plain jqUnit tests.

Integration testing within a component tree

The concept of context in Infusion IoC is derived from the entire collection of components held in an IoC component tree. The behaviour of each component is potentially altered by all of the other components with which it is deployed.

  • for a detailed guide to the operation of scope within Infusion IoC, please consult the page on Contexts.

Therefore in order to test component behaviour in context, we need a testing system whose lifecycle (in particular, the lifecycle of setup and teardown common to all testing systems) is aligned with the lifecycle of component trees - as well as a testing system which enables testing directives to be referred to the components under test, wherever they may be in the tree.

Event sequence testing

The idiom to be used when binding event listeners which are responsible for implementing application behaviour is very different from that to be used when testing the application behaviour. Implementation listeners are typically bound permanently - that is, for the entire lifecycle of the component holding the listener. This is in order to make application behaviour as regular as possible, and in order to make it as easy as possible to reason about application behaviour by excluding race conditions. However, when writing tests directed at an event stream, typically the behaviour required for the listener to each individual event in the sequence is different - since the testing assertion(s) held in the listener will be verifying a component state against required conditions which change with each successive event. This requirement often makes test fixture code convoluted and brittle, holding deeply nested sequences of event binding and unbinding operations held within listeners to other events. We need a system which allows such assertions to be expressed declaratively, with this sequence flattened out into a linear list of JSON elements corresponding to each successive state in the event chain.

How to Use the IoC Testing Framework

Writing fixtures using the IoC Testing framework requires the test implementor to derive from two special grades, fluid.test.testEnvironment and fluid.test.testCaseHolder, which are packaged within the testing framework implementation in the file IoCTestUtils.js. The tester must derive their own component types from these grades, and assemble them into various component trees corresponding to the desired integration scenarios.

The first type of component corresponds to the overall root of the component tree under test - the test environment, defined in the grade fluid.test.testEnvironment. The children of this component correspond to the entire "application segment" under test - this may be as large (as an entire application) or as small (as a single component) as required in order to comprise the desired fixture. These children are intermixed with components of the second type, the test fixtures, derived from the grade fluid.test.testCaseHolder. These fixture components are holders for declarative JSON configuration defining the sequence and structure of a group of test cases which are to be run.

modules, tests and sequence

The standard structure inside a fluid.test.testCaseHolder has an outer layer of containment, modules, with members corresponding to QUnit modules, and within that an entry named tests, holding an array of structures corresponding to QUnit test. In ordinary use, each element tests then contains a member named sequence holding a list of fixture records.

As well as containing a flat list of fixture records, sequence may also contain nested arrays of such records. These nested arrays will be flattened into a single array by use of the utility fluid.flatten before being processed. This helps in assembling complex sequences out of previously canned sequence segments. However, building up complex, reusable test sequences is best done by use of the sequenceGrade element, instead of the sequence element.

Simple Example

This simple example shows the testing of a simple component, fluid.tests.cat which defines one event, onMakeSound, and an invoker makeSoundLater which fires the event asynchronously with the supplied argument. Firstly, we define the component under test:

/** Component under test **/
fluid.defaults("fluid.tests.cat", {
    gradeNames: ["fluid.component"],
    events: {
        onMakeSound: null
    },
    invokers: {
        makeSoundLater: {
            funcName: "fluid.tests.cat.makeSoundLater",
            args: ["{that}", "{arguments}.0"]
        }
    }
});

fluid.tests.cat.makeSoundLater = function (that, sound) {
    fluid.invokeLater(function () {
        that.events.onMakeSound.fire(sound);
    });
};

In order to test this single component, we embed it appropriately within a testing environment, derived from the grade fluid.test.testEnvironment, together with a component to hold the test fixtures named fluid.tests.catTester:

/** Testing environment - holds both fixtures as well as components under test, exposes global test driver **/
fluid.defaults("fluid.tests.catTestTree", {
    gradeNames: ["fluid.test.testEnvironment"],
    components: {
        cat: {       // instance of component under test
            type: "fluid.tests.cat"
        },
        catTester: { // instance of test fixtures
            type: "fluid.tests.catTester"
        }
    }
});

Finally, we need to define the test fixture holder itself, fluid.tests.catTester, derived from fluid.test.testCaseHolder, as well as the test fixture code itself. This contains a simple sequence of 2 elements, the first of which is an active fixture record which calls the invoker, and the second of which is a passive fixture record which waits for the event to be fired and makes an assertion that its argument is correct:

/** Test Case Holder - holds declarative representation of test cases **/
fluid.defaults("fluid.tests.catTester", {
    gradeNames: ["fluid.test.testCaseHolder"],
    modules: [ /* declarative specification of tests */ {
        name: "Cat test case",
        tests: [{
            expect: 1,
            name: "Test Asynchronous Meow",
            sequence: [{
                func: "{cat}.makeSoundLater",
                args: "meow"
            }, {
                event: "{cat}.events.onMakeSound",
                listener: "fluid.tests.testCatSound"
            }]
        }
        ]
    }]
});

fluid.tests.testCatSound = function (sound) {
    jqUnit.assertEquals("CATT sound is MEO", "meow", sound);
};
Note: In straightforward cases, the test environment component (e.g. fluid.tests.catTestTree), and the test fixture component (e.g. fluid.tests.catTester) can be written as the same component.

A more complex example of the sequence element appears below in the asyncTester example below.

In order to run this test case, we can either simply construct an instance of the environment tree by calling fluid.tests.catTestTree(), or submit its name to the global driver function fluid.test.runTests as fluid.test.runTests("fluid.tests.catTestTree"). The latter method should be used when running multiple environments within the same file to ensure that their execution is properly serialised.

Supported fixture records

The IoC testing system currently supports the following 6 types of fixture record, which can be assigned to two categories - "executors", which actively trigger an action, and "binders" which register some form of listener in order to receive an event from the tree under test. These are recognised using a "duck typing system" similar to that used in the Fluid Renderer. These records may either form the complete payload for a test held in the tests section of a TestCaseHolder, or may appear as elements of an array held in its sequence member, representing a sequence of actions (either executors or binders) to be performed by the test case.

Fixture nameField nameField typeField descriptionFixture category
Function executor func/funcName[*] {Function|String} The function to be executed, represented either literally (not recommended) or as an IoC reference to a function or the global name of one. It is also possible to use the compact format for invokers to encode the contents of args within the IoC reference func in simple cases. executor
args [optional] {Object|Array} The argument or arguments to be supplied to function
Event listener event [*] {String} Reference to the event to which the listener will be bound. This may be either a standard IoC Reference to an event above the testCaseHolder, or else a full IoCSS reference to an event anywhere in the tree. binder
listener[†] {Function|String}Reference to the listener to be bound to the event
args[†] [optional] {Object|Array}

Arguments to be supplied to the listener function when it is called - these may contain IoC references including references to the context {arguments} as described in Listener Boiling

listenerMaker[‡] {Function|String}A function which will produce a listener to be bound
makerArgs[‡] [optional] Object/Array The arguments to be supplied to the listener maker function in order to produce a listener
Task task [*] {String} Reference to a function returning a Promise - such a function is known as a task. executor
args [optional] {Object|Array} The argument or arguments to be supplied to the function task
resolve[†] {Function|String} A function to be registered as an onResolve callback to the promise. Exactly one out of the fields resolve, reject must be set.
resolveArgs[†] [optional] {Object|Array} Arguments to be supplied to the resolve function when it is called - these may contain IoC references including references to the context `{arguments}` as described in [Listener Boiling](EventInjectionAndBoiling.md#listener-boiling).
reject[‡] {Function|String} A function to be registered as an onReject callback to the promise. Exactly one out of the fields resolve, reject must be set.
rejectArgs[‡] [optional] {Object|Array}

Arguments to be supplied to the reject function when it is called - these may contain IoC references including references to the context {arguments} as described in Listener Boiling.

Change event listener changeEvent [*] {String} Reference to the change event to be listened to. Must be the modelChanged event attached to the ChangeApplier of a component - e.g. a reference of the form {component}.applier.modelChanged binder
path{String} A path specification matching the EL paths for which the listener is to be registered, as per the ChangeApplier API. Just one of path or spec should be used.
spec{Object}A record holding a structured description of the required listener properties, as per the ChangeApplier API. Just one of path or spec should be used.
listener[†] {Function|String}The listener to be bound to the event
args[†] [optional] {Object|Array}

arguments to be supplied to the listener function when it is called - these may contain IoC references including references to the context {arguments} as described in Listener Boiling. {change} is not currently supported.

listenerMaker[‡] {Function|String}A function which will produce a listener to be bound
makerArgs[‡] [optional] {Object|Array} arguments to be supplied to the listener maker function in order to produce a listener
jQuery event triggerjQueryTrigger [*] {String} The name of a jQuery event (jQuery eventType) to be triggered via a call to jquery.triggerexecutor
args [optional] {Object|Array}additional arguments to be supplied to jQuery.trigger
element {jQueryable} (DOM element, jQuery, or selector)The jQuery object on which the event is to be triggered
jQuery event binder jQueryBind [*] {String} The name of a jQuery event for which a listener is to be registered via a call to jquery.onebinder
element {jQueryable} (DOM element, jQuery, or selector)The jQuery object on which a listener is to be bound
args [optional] {Object|Array} additional arguments to be supplied to jQuery.one
listener[†] {Function|String} The listener to be bound to the event
listenerMaker[‡] {Function|String} A function which will produce a listener to be bound
makerArgs[‡] [optional] {Object|Array} arguments to be supplied to the listener maker function in order to produce a listener

In each case in this table,

  • In cases where "Field type" accepts a String and the description reads "reference to", the field holds an IoC reference to the value in question.
  • Fields marked with [*] (grey rows) are the essential "duck typing fields" which define the type of the fixture records and are mandatory.
  • Fields marked with [†] (red rows) and [‡] (green rows) are alternatives to each other - they may not be used simultaneously within the same fixture. For example, you must use just one of the styles listener or listenerMaker to specify an event listener, or specify just one of resolve or reject to a task fixture.

More Advanced Use of the IoC Testing Framework

This section covers topics of interest to more advanced users of the IoC Testing Framework. These topics relate to more flexible and dynamic ways of building up test sequence fixtures, beyond simply listing them in the fixed array named sequence.

Using sequenceGrade to build up complex, reusable test sequences

A common patten is for groups of related tests to form an ecology, sharing some test sequence elements but with others interleaved between them and/or some others removed or reconfigured. Working with the raw sequence array directly will lead to this testing code becoming fragile as the sequence array indices will be unstable between different members of the ecology. Instead, the IoC Testing framework supports a variant element sequenceGrade which uses Infusion's priority system to allow sequences to be built up piece by piece using priority directives after: and before: expressing their relative positions in the sequence. sequenceGrade can be used together with the existing sequence element, but is more regularly used without it.

The element sequenceGrade holds a string value, designating a component grade name which has been implemented by the test case author, descended from the standard framework grade fluid.test.sequence. The framework will instantiate a component with this grade as a child component of the testCaseHolder, and then resolve its options path sequenceElements, whose keys represent namespaces and whose values are of a type testSequenceElement, the members of which are described in the following table:

Members of a testSequenceElement entry within the sequenceElements block of a fluid.test.sequence component
Member Type Description
gradeNames (optional) {String|Array of String} One or more grade names, designating the grades of a component descended from fluid.test.sequenceElement
options (optional) {Object} Any additional options required to construct the fluid.test.sequenceElement
priority (optional) {Priority} value - see Priorities for a full explanation The priority (if any) that the sequence element component should have over any others appearing within the same elements block of its parent fluid.test.sequence. The namespaces used in these priority constraints will be taken from the keys of the elements hash.
namespace (optional) {String} If present, will override the key of this member of elements in representing the namespace of this element.

The members gradeNames and options in the above table collectively designate an Infusion component derived from fluid.test.sequenceElement — this component will be instantiated as a child component of the fluid.test.testCaseHolder and its options member sequence will be evaluated. This member sequence holds one or more fixture elements just as seen in the top-level sequence element.

Any fixture elements listed at the traditional top-level sequence member will be grandfathered in to this system with a namespace of sequence — for example, a testSequenceElement with a priority of "before:sequence" will be sorted before these elements.

Example of sequence building using sequenceGrade

Here is a simple example of building up a sequence of elements piece by piece, using priority constraints of the type after:<namespace> and before:<namespace>. At the top level, we define a compound testEnvironment and testCaseHolder that defines a single module holding a single test, referencing the grade fluid.tests.elementPrioritySequence as designating the overall sequence to be built up as a sequenceGrade. This grade is defined with four testSequenceElement entries, whose namespaces are check, end, postBeginning and beginning (deliberately defined in a different order to that which they will be executed in). These elements each specify a priority element to guide the order in which they should be sorted into a sequence. If you run this example, you will see them executed in the order beginning, postBeginning, sequence (the grandfathered-in top-level sequence), end and finally check.

The sequence makes use of two reusable sequenceElement grades, fluid.tests.elementPriority.log which defines a sequence element which logs a console message (this fixture element uses the compact syntax for encoding simple argument lists together with the function), and fluid.tests.elementPriority.check which defines a sequence element making a jqUnit assertion which always passes.

fluid.defaults("fluid.tests.elementPriority.log", {
    gradeNames: "fluid.test.sequenceElement",
    sequence: [{
        func: "fluid.log({that}.options.message)"
    }]
});

fluid.defaults("fluid.tests.elementPriority.check", {
    gradeNames: "fluid.test.sequenceElement",
    sequence: [{
        func: "jqUnit.assert",
        args: "I am the check, right at the end"
    }]
});

fluid.defaults("fluid.tests.elementPrioritySequence", {
    gradeNames: "fluid.test.sequence",
    sequenceElements: {
        check: {
            gradeNames: "fluid.tests.elementPriority.check",
            priority: "after:end"
        },
        end: {
            gradeNames: "fluid.tests.elementPriority.log",
            options: {
                message: "I am at the end, just before the check"
            },
            priority: "after:sequence"
        },
        postBeginning: {
            gradeNames: "fluid.tests.elementPriority.log",
            options: {
                message: "I come after the beginning"
            },
            priority: "after:beginning"
        },
        beginning: {
            gradeNames: "fluid.tests.elementPriority.log",
            options: {
                message: "I will be executed first"
            },
            priority: "before:sequence"
        }
    }
});

fluid.defaults("fluid.tests.elementPriority", {
    gradeNames: ["fluid.test.testEnvironment", "fluid.test.testCaseHolder"],
    modules: [{
        name: "Priority-driven grade budding",
        tests: [{
            expect: 1,
            name: "Simple sequence of 4 active elements",
            sequenceGrade: "fluid.tests.elementPrioritySequence",
            sequence: [{
                func: "fluid.log",
                args: "I am the original sequence, in the middle"
            }]
        }
        ]
    }]
});

A further author could now use grade inheritance to build on the above testing scenario to add their own element — for example, easily interleaving an extra step before the end step:

fluid.defaults("fluid.tests.derivedElementPrioritySequence", {
    gradeNames: "fluid.tests.elementPrioritySequence",
    sequenceElements: {
        beforeEnd: {
            gradeNames: "fluid.tests.elementPriority.log",
            options: {
                message: "I come just before the end"
            },
            priority: "before:end"
        }
    }
});

fluid.defaults("fluid.tests.derivedElementPriority", {
    gradeNames: ["fluid.test.testEnvironment", "fluid.test.testCaseHolder"],
    modules: [{
        name: "Derived Priority-driven grade budding",
        tests: [{
            expect: 1,
            name: "Sequence with extra element inserted before end",
            sequenceGrade: "fluid.tests.derivedElementPrioritySequence"
        }]
    }]
});

Using moduleSource for dynamic test fixtures

To take complete control of the fixture building process, you can write arbitrary code returning the entire set of modules by replacing it with the entry moduleSource which takes the same form as an invoker record with entries func/funcName and args, and returns a list of fixtures in the same format as modules. Again, in a real example, this would use the sequence form of fixtures shown at the bottom of the page.

Before choosing this option, you are encouraged to see how far you can go with the completely declarative approach involving sequenceGrade.

// Example of the above fixture written with "moduleSource"
// Definition of modules as namespaced global so that it is available for others and processing
fluid.tests.catTesterModules = [{
    name: "Cat test case",
    tests: [{
        expect: 1,
        name: "Test Global Meow",
        type: "test",
        func: "fluid.tests.globalCatTest",
        args: "{cat}"
    }]
}];

// A helper function which just returns the global -
// realistically, it would assemble a sequence using more complex logic
fluid.tests.getCatModules = function () {
    return fluid.tests.catTesterModules;
};

fluid.defaults("fluid.tests.catTester", {
    gradeNames: ["fluid.test.testCaseHolder"],
    moduleSource: {
        funcName: "fluid.tests.getCatModules"
    }
});

A More Complex Example using sequence

This example shows sequence testing of a view component fluid.tests.asyncTest with genuine asynchronous behaviour (as well as synchronous event-driven behaviour). The component under the test is an Infusion Renderer component which renders a button, and a model-bound text entry field. The component defines a listener to clicks to the button which asynchronously (via window.setTimeout) fires to an Infusion event named buttonClicked. Separately, the component binds listeners to change events from the text field, which are corresponded with the standard ChangeApplier events resulting from corresponding changes to the component's model.

/** Component under test **/
fluid.defaults("fluid.tests.asyncTest", {
    gradeNames: ["fluid.rendererComponent"],
    model: {
        textValue: "initialValue"
    },
    selectors: {
        button: ".flc-async-button",
        textField: ".flc-async-text"
    },
    events: {
        buttonClicked: null
    },
    protoTree: {
        textField: "${textValue}",
        button: {
            decorators: {
                type: "fluid",
                func: "fluid.tests.buttonChild"
            }
        }
    }
});

fluid.defaults("fluid.tests.buttonChild", {
    gradeNames: ["fluid.viewComponent"],
    events: {
        buttonClicked: "{asyncTest}.events.buttonClicked"
    },
    listeners: {
        "onCreate.bindClick": "fluid.tests.buttonChild.bindClick"
    }
});

fluid.tests.buttonChild.bindClick = function (that) {
    that.container.click(function () {
        setTimeout(that.events.buttonClicked.fire, 1);
    });
};

Just as with the simple cat testing example above, we embed this component together with a suitable TestCaseHolder within an overall testEnvironment:

fluid.defaults("fluid.tests.asyncTestTree", {
    gradeNames: ["fluid.test.testEnvironment"],
    markupFixture: ".flc-async-root",
    components: {
        asyncTest: {
            type: "fluid.tests.asyncTest",
            container: ".flc-async-root"
        },
        asyncTester: {
            type: "fluid.tests.asyncTester"
        }
    }
});

Walkthrough of the example sequence

Finally, we show the contents of the associated TestCaseHolder. In this case, the 1 test it defines holds a sequence member prescribing a sequence of 11 states for the component, which run a total of 7 jqUnit assertions. These show records of 5 of the types defined above - the framework ensures the correct sequence of activities (including binding and unbinding of listeners registered in binder records) is operated.

The sequence first initiates rendering of the overall component with a custom global function fluid.tests.startRendering, which checks that the component has rendered correctly and then initiates a click on the rendered button element. The sequence then checks for the expected asynchronous Fluid event firing - it then synthesises a further click on the button and checks for the same event again. It then synthesises an update to the rendered text field in the UI, and listens to the expected ChangeEvent generated by this update. It changes the field again to a different value and listens for the further ChangeEvent. Next, the sequence makes a direct call to a jqUnit assertion function to verify that the component's model has been updated properly. Finally, it returns to the button, directly simulating a click event using the jQueryTrigger fixture type, and listening to that event itself using the jQueryBind fixture type.

The TestCaseHolder makes reference to a few global utility functions which are reproduced below.

testCaseHolder demonstrating sequence record

fluid.defaults("fluid.tests.asyncTester", {
    gradeNames: ["fluid.test.testCaseHolder"],
    newTextValue:     "newTextValue",
    furtherTextValue: "furtherTextValue",
    modules: [ {
        name: "Async test case",
        tests: [{
            name: "Rendering sequence",
            expect: 7,
            sequence: [ {
                func: "fluid.tests.startRendering",
                args: ["{asyncTest}", "{instantiator}"]
            }, {
                listener: "fluid.tests.checkEvent",
                event: "{asyncTest}.events.buttonClicked"
            }, { // manually click on the button
                jQueryTrigger: "click",
                element: "{asyncTest}.dom.button"
            }, {
                listener: "fluid.tests.checkEvent",
                event: "{asyncTest}.events.buttonClicked"
            }, { // Issue two requests via UI to change field, and check model update
                func: "fluid.tests.changeField",
                args: ["{asyncTest}.dom.textField", "{asyncTester}.options.newTextValue"]
            }, {
                // old-fashioned "listenerMaker" - discouraged in modern code
                listenerMaker: "fluid.tests.makeChangeChecker",
                args: ["{asyncTester}.options.newTextValue", "textValue"],
                path: "textValue",
                changeEvent: "{asyncTest}.applier.modelChanged"
            }, {
                func: "fluid.tests.changeField",
                args: ["{asyncTest}.dom.textField", "{asyncTester}.options.furtherTextValue"]
            }, {
                listenerMaker: "fluid.tests.makeChangeChecker",
                makerArgs: ["{asyncTester}.options.furtherTextValue", "textValue"],
                // alternate style for registering listener
                spec: {path: "textValue", priority: "last"},
                changeEvent: "{asyncTest}.applier.modelChanged"
            }, {
                func: "jqUnit.assertEquals",
                args: ["Model updated", "{asyncTester}.options.furtherTextValue",
                    "{asyncTest}.model.textValue"]
            }, { // manually click on the button a final time with direct listener
                jQueryTrigger: "click",
                element: "{asyncTest}.dom.button"
            }, {
                jQueryBind: "click",
                element: "{asyncTest}.dom.button",
                listener: "fluid.tests.checkEvent"
            }
            ]
        }
        ]
    }]
});

fluid.tests.checkEvent = function () {
    jqUnit.assert("Button event relayed");
};

fluid.tests.changeField = function (field, value) {
    field.val(value).change();
};

fluid.tests.makeChangeChecker = function (toCheck, path) {
    return function (newModel) {
        var newval = fluid.get(newModel, path);
        jqUnit.assertEquals("Expected model value " + toCheck + " at path " + path, toCheck , newval);
    };
};

fluid.tests.startRendering = function (asyncTest, instantiator) {
    asyncTest.refreshView();
    var decorators = fluid.renderer.getDecoratorComponents(asyncTest, instantiator);
    var decArray = fluid.values(decorators);
    jqUnit.assertEquals("Constructed one component", 1, decArray.length);
    asyncTest.locate("button").click();
};

Such repetitive sequences of standardised fixtures are best factored into reusable grades of type fluid.test.sequenceElement as seen in the sequenceGrade example above.

markupFixture property supporting fixtures written against markup in the host document

This environment shows use of the optional markupFixture property on the testEnvironment. Since the IoC testing framework operates setup/teardown on the unit of overall testEnvironments, we cannot (should not) make use of QUnit's standard markup setup/teardown operated on the hard-wired DOM node with id qunit-fixture, which is on the unit of individual test cases. The markupFixture property is to be used where the overall environment makes use DOM material where its markup is rendered, which should be reset to its original value between runs of different testEnvironments. The markupFixture property holds any jQueryable value, designating the overall root node of this DOM material. After the testEnvironment has been torn down, the framework will reset the markup within this root to the contents it enjoyed before setup of the environment.

Sequence progress feedback in the browser

When run in the browser, the framework will show feedback in the QUnit UI relating to the sequence point reached by the system. This can be used to diagnose the last successfully reached sequence point in the case of a "hang" caused by an unexpectedly missing event in the sequence.

Sequence hang test detection

If the next expected "binder" type fixture in a test sequence is not reached within a configurable interval, the console will log a message of the following form to help the user to diagnose how far the system has progressed through the sequence:

21:26:33.262: Test case listener has not responded after 5000ms - at sequence pos 4 of 7 sequence element {
"event": "{testEnvironment}.browser.events.onLoaded",
"listener": "{testEnvironment}.browser.evaluate",
"args": [
{ Function

    },
    "md",
    "[unified listing](https://ul.gpii.net/)"
]
} of fixture Confirm that the client-side renderer can render markdown...

The default value of the interval is 5000ms, which can be altered by supplying a value in ms to the option hangWait of the testEnvironment.

Running tests in the node.js server environment

The IoC Testing Framework can also be used to run test sequences in the node.js server environment - in this case the above browser-related features (markupFixture, live sequence progress) are not provided. However, the sequence hang detection message appears in all environments.

Design Discussion about the Testing Framework

The framework was designed over October-December 2012, with initial call for implementation on the fluid-work mailing list at October 31st, continuing over a sequence of community meetings, and including a summary of work in progress on December 5th. The overall goals for the testing framework were presented as these:

  • To facilitate the testing of demands blocks that may be issued by integrators against components deployed in a particular (complex) context
  • To automate and regularise the work of "setup" and "teardown" in complex integration scenarios, by deferring this to our standard IoC infrastructure
  • To simplify the often tortuous logic required when using the "nested callback style" to test a particular sequence of asynchronous requests and responses (via events) issued against a component with complex behaviour
  • To facilitate the reuse of testing code by allowing test fixtures to be aggregated into what are the two standard forms for our delivery of implementation - a) pure JSON structures which can be freely interchanged and transformed, b) free functions with minimum dependence on context and lifecycle

The framework was given a substantial spring-cleaning in October 2016, implementing significant new features such as promise-based fixtures, and priority-driven sequence grade assembly, and some support for compact invokers. A few significant bugs remain, especially when listing multiple "listener"-type fixtures adjacent in the sequence - see FLUID-5502. The support for model change event fixtures is also very old-fashioned and needs to be reformed - see FLUID-6077.